Metal Roofing Installation in Lincoln, CA

Lincoln is a clay-tile town at heart. Gladding, McBean has been firing roof tile from local clay here since the 1890s, and plenty of houses wear it. Still, more owners now ask about metal. We install standing seam and stone-coated steel roofs on homes across Lincoln, CA, and we will tell you honestly when metal makes sense and when your tile is worth keeping.

(916) 314-6771

Get a Free Estimate

Tell us about the roof. Only your name and phone are required.

Form powered by splitforms

Charcoal standing seam metal roof on a single-story home in Lincoln, CA

Tile town, metal roof?

The Gladding, McBean plant on the edge of downtown opened in 1875 on a local clay deposit, and its terra cotta and roof tile ended up on buildings well beyond Placer County. That history is one reason older neighborhoods near downtown and many newer subdivisions use tile. So why do Lincoln owners switch?

  • Weight. Concrete tile is heavy. A metal roof weighs a small fraction of that, which matters on additions, patio covers and older framing.
  • Underlayment age. On a tile roof the tile rarely fails first. The felt underneath dries out in the valley heat, and once it cracks, the roof leaks even though the tiles look perfect.
  • Solar plans. Panels clamp directly to standing seams without drilling, which simplifies a solar install on the same roof.
  • Heat. A cool-rated metal finish reflects a large share of the summer sun.

If your tile is sound and the underlayment is the only issue, a tile reset with new underlayment can be a good choice. We look at both before we recommend anything.

Built for Lincoln summers

Lincoln sits on the floor of the Sacramento Valley where it starts rising into the foothills, and summer highs often climb past 100 degrees. A dark roof absorbs that heat all afternoon and keeps radiating it into the attic after sunset. Metal panels in light or "cool" colors stay noticeably cooler, and a vented ridge plus balanced intake at the eaves helps the attic dump heat at night. That combination is often what makes upstairs rooms more comfortable in July.

Metal also expands and contracts with the big swing between afternoon and night temperatures. Standing seam systems use clips that let each panel move a little without stressing the fasteners, which is why we steer most homes toward that profile instead of exposed-screw panels.

Crew setting metal roof panels on a ranch home in Lincoln, CA

Fire season and the foothills

Lincoln itself is mostly suburban valley ground, but the grassland on its edges and the oak foothills toward Auburn and Penryn do burn. Steel roofing does not ignite, and most of the systems we install are listed as Class A assemblies. We pair that with metal gutters, sealed ridge closures and attic vents with fine mesh, because wind-blown embers are what usually find their way into houses during a fire.

Stone-coated steel or standing seam?

Stone-coated steel is formed to look like tile, shake or shingles and covered with a granule finish. It is the choice for owners who like the tile look but want something lighter, or whose HOA expects a tile profile. Standing seam gives a sleek modern look, and it suits farmhouse-style homes in newer developments and the many outbuildings, barns and shops on larger parcels west of town.

Neighborhood rules

Many Lincoln homes sit in planned communities, including the large Sun City Lincoln Hills active-adult area and the Twelve Bridges neighborhoods. Associations there commonly restrict roof materials and colors, and some require architectural approval before any change. We prepare product sheets, color samples and the fire rating information so you can submit to your committee with everything in one package. The city building department issues the re-roof permit, and inspections are scheduled around the work.

What installation looks like

  1. Old roofing comes off, down to the deck. Tile is stacked and hauled; reusable tile can sometimes be donated.
  2. The deck is inspected. Damaged sheathing is replaced, and fasteners are added where needed.
  3. High-temperature synthetic underlayment goes down. It holds up under metal far better than old felt in this heat.
  4. Eave and rake trim, valleys and wall flashings are installed.
  5. Panels are set and seamed, followed by ridge vent and final trim.
  6. Gutters are checked, the yard is cleaned with a magnet sweep, and you get a walk-through.

Not sure where your roof stands today? Start with a roof inspection, or compare other materials on our roof replacement page.

Common questions

Can I put solar on a metal roof?

Yes. Standing seam is one of the easiest roofs to mount solar on, because clamps attach to the seams instead of through the panels.

Will metal dent from hail?

Hail is uncommon in Lincoln. Heavier gauges and textured finishes resist dents if it does happen.

How long will it last?

A quality metal roof with a good paint system typically lasts for decades, longer than most asphalt roofs.

Thinking about metal for your Lincoln home?

Call (916) 314-6771 and we will measure the roof, look at what is up there now and show you panel profiles and cool-rated colors.